You can refer to this HP document for more assistance:- Click here The printer cleans the printhead and then prints a test page. Touch Tools, and then touch Clean Cartridges. On the printer control panel, touch the Settings icon. letter or A4 size paper in the input tray, if it is not already loaded. Run your finger along the top of the cartridges to feel for any that are protruding, and if any are, press down firmly until each ink cartridge snaps into place. Make sure each ink cartridge is firmly in place in its slot. Repeat these steps to inspect the vents on each ink cartridge. Make sure the color icon on the ink cartridge label matches the color icon on the slot. Press down on the ink cartridge until it snaps into place. With the nozzle and the contacts facing down, slide the ink cartridge into its slot. With a straight pin, gently remove excess adhesive from the vent If the vent is clogged, use a straight pin to gently remove excess adhesive from the vent. If the ink cartridge still has the pull tab attached, pull to remove it. Press the tab on the front of the ink cartridge inward to release it, and then pull up on the ink cartridge to remove it from the slot.Įxamine the vent area on each ink cartridge, above the HP logo on the top of the ink cartridge. Wait until the carriage stops moving before you continue. Turn on the printer, if it is not already on. Make sure the ink cartridges are properly vented and seated correctly
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |